en:products:comfortel-d-series:d-100-200:developer:provisioning:settings:telephony

FEHLER: Die ODT Vorlage "dokuwiki-odt-template.odt" konnte im Vorlagenverzeichnis "odt" nicht gefunden werden. Der Export wurde abgebrochen.

Telephony

Most general telephony settings are combined within the telephony block.

To configure a basic connection to your telephony service or pbx you need to configure an identity.

telephony.xml
  1. <!-- settings for local telephony features. -->
  2. <telephony>
  3. <!-- if and how a waiting call has to be signalised -->
  4. <callWaiting>
  5. <!-- enables the function callWaiting
  6. type: boolean -->
  7. <active>false</active>
  8. <!-- enables the signalisation of a waiting call
  9. type: boolean -->
  10. <tone>true</tone>
  11. </callWaiting>
  12. <!-- if an incoming call shall be rejected -->
  13. <doNotDisturb>
  14. <!-- enables the function doNotDisturb
  15. type: boolean -->
  16. <active>false</active>
  17. </doNotDisturb>
  18. <!-- -->
  19. <callForwarding>
  20. <!-- -->
  21. <unconditional>
  22. <!-- enables call forwarding
  23. type: boolean -->
  24. <active>false</active>
  25. <!-- the target to forward calls to
  26. type: string -->
  27. <target></target>
  28. <!-- the time [s] after which the call must be forwarded
  29. type: integer -->
  30. <timeout>20</timeout>
  31. </unconditional>
  32. <!-- -->
  33. <busy>
  34. <!-- enables call forwarding
  35. type: boolean -->
  36. <active>false</active>
  37. <!-- the target to forward calls to
  38. type: string -->
  39. <target></target>
  40. <!-- the time [s] after which the call must be forwarded
  41. type: integer -->
  42. <timeout>20</timeout>
  43. </busy>
  44. <!-- -->
  45. <noResponse>
  46. <!-- enables call forwarding
  47. type: boolean -->
  48. <active>false</active>
  49. <!-- the target to forward calls to
  50. type: string -->
  51. <target></target>
  52. <!-- the time [s] after which the call must be forwarded
  53. type: integer -->
  54. <timeout>20</timeout>
  55. </noResponse>
  56. </callForwarding>
  57. <!-- Tells the PBX to hide the callers identity in outgoing calls. -->
  58. <clir>
  59. <!-- Tells the PBX to hide the callers identity in outgoing calls.
  60. type: boolean -->
  61. <active>false</active>
  62. </clir>
  63. <!-- When enabled looks for name of call-partner in adressbooks (local, ldap, ..). -->
  64. <reverseNumberLookup>
  65. <!-- When enabled looks for name of call-partner in adressbooks (local, ldap, ..).
  66. type: boolean -->
  67. <active>true</active>
  68. </reverseNumberLookup>
  69. <!-- default audio device in idle like headset or speaker
  70. type: string
  71. accepted values:
  72. speaker
  73. headset -->
  74. <defaultAudioDevice>speaker</defaultAudioDevice>
  75. <!-- line to use for unspecified outgoing calls. Uses the first defined line if not defined
  76. -->
  77. <activeLine>
  78. <!--
  79. type: string -->
  80. <id></id>
  81. <!--
  82. type: string -->
  83. <component></component>
  84. </activeLine>
  85. <!-- Time delay to start the call when there is no activity. Measured in milliseconds. -1 = never
  86.  
  87. type: integer -->
  88. <callStartTimeout>-1</callStartTimeout>
  89. <!-- connect incoming call automatically without user-interaction -->
  90. <autoAccept>
  91. <!-- allow calls to automatically connect when they want to (in SIP-invite -> Alert-Info-header with info=alert-autoanswer)
  92. type: boolean -->
  93. <immediatelyWhenRequested>false</immediatelyWhenRequested>
  94. <!-- Time delay to accept an incoming call automatically. Measured in milliseconds. -1 = never
  95.  
  96. type: integer
  97. minimum: -1
  98. maximum: 60000 -->
  99. <afterTimeout>-1</afterTimeout>
  100. <!-- sound a short signal when a call gets auto-connected
  101. type: boolean -->
  102. <withAlarmBeep>true</withAlarmBeep>
  103. <!-- place ongoing calls on hold in order to connect auto-answer-call. With false just lets them knock.
  104. type: boolean -->
  105. <interruptWhenBusy>false</interruptWhenBusy>
  106. </autoAccept>
  107. <!-- when an outgoing call fails (busy 'CCBS', not responding 'CCNR') -> monitor the remote via subscription and inform the user when party becomes available -->
  108. <callCompletion>
  109. <!-- enables the function callCompletion
  110. type: boolean -->
  111. <active>true</active>
  112. <!-- time to wait for 'not responding' in seconds
  113. type: integer
  114. minimum: -1
  115. maximum: 60 -->
  116. <timeout>-1</timeout>
  117. </callCompletion>
  118. <!--
  119. type: list -->
  120. <callBindings>
  121. </callBindings>
  122. <!-- decide whether the reached target or the initially called target should be used in the calllog.
  123. the default will show the called target.
  124. Set to true, the config will lead to the reached target stated in the calllog, while the initially called number can be found in the via section of the calllog details.
  125.  
  126. type: boolean -->
  127. <callLogWithReachedTarget>false</callLogWithReachedTarget>
  128. </telephony>
  • en/products/comfortel-d-series/d-100-200/developer/provisioning/settings/telephony.txt
  • Last modified: 03.12.2021 13:32
  • by neubauers