VLAN [DokuWiki extern]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== VLAN ======
The built-in switch of D-Series telephones supports the separation of networks into logical units, so called virtual lans (VLAN). The phone itself can be put into a VLAN, while the optionally to the PC port attached device can be put into another VLAN or work without.

===== Configuring the phone to use VLAN =====
To put the phone into a VLAN, the fields `Phone VLAN ID` and `Phone VLAN Priority` must be filled and `Phone VLAN` must be activated. Every network-packet sent out by the phone will then be tagged accordingly and the phone won't receive packets that are not tagged correctly.


===== Configuring the PC port to use VLAN =====
To put a device connected to the PC port into a VLAN, the fields `PC port VLAN ID` and `PC port VLAN Priority` must be filled and `PC port VLAN` must be activated. Every network-packet sent out by the device attacted will then be tagged accordingly and the device won't receive packets that are not tagged correctly.

===== Known issues =====
As of now, the **transparent mode on the PC port** of D200, D400 and D600 telephones **does not work** if the phone itself uses VLAN and the **device connected to the PC port uses VLAN on its own**. Until another solution has been found, users are advised to use the VLAN-configuration in the telephone's switch to put devices connected to the PC port into the correct VLAN.