Skip to content

Activate config#

Sends a special feature-code to the PBX to activate a configuration: ##8*81 + configuration id + # + extention.

  • green when config is active (pbx must report a busy destination in the dialog-subscription to the feature-code). Key-press does nothing in this state.
  • off when config is not active → key-press will send the feature-code


The current template itself for this key-type can be found here.


The key-type has the following parameters:


The identity the key is tied to. Only active identities can make calls or send sip-subscriptions.

Configuration id#

The ID that identifies the configuration.